Bi4Ge3O12:Er3+晶体中的高阶混合效应对EPR g因子的影响

通过对角化364×364完全能量矩阵的理论方法,对掺杂在Bi₄Ge₃O₁₂晶体中的Er³⁺的Stark能级和EPR参数进行了研究,同时,定量分析了高阶晶体场混合效应和J-J混合效应对EPR g因子的影响。研究结果表明:对Er³⁺来说,最主要的J-J混合效应来源于多重态谱项²K_15/2,其对EPR g因子的贡献约占2.5%,而最主要的高阶晶体场混合效应来源于第一激发多重态⁴I_13/2和基态多重态⁴I_15/2之间的晶体场混合,其对各向异性g因子中g_⊥的贡献大致是g_//的两倍(即g_⊥约占 0.21%,g_//约占0.092%),其他更高阶的晶体场混合和J-J混合效应可以忽略不计。因此,对于Er³⁺掺杂的络合物系统来说,只考虑基态多重态⁴I_15/2对EPR g因子的贡献应该是一个很好的近似。     

Spectrum–effect relationship of antioxidant and anti-inflammatory activities of Laportea bulbifera based on multivariate statistical analysis

Laportea bulbifera, named Hong He Ma in Chinese, is a Chinese herbal medicine commonly used by the Miao nationality of China. In this study, 43 batches of L. bulbifera were collected from different origins in China. Ethanol, ethyl acetate and petroleum ether were used to prepare different extracts of the plant. UHPLC technique was used to establish the fingerprints, whereas DPPH assay and RAW264.7 inflammatory cell models were used to evaluate the antioxidant and anti-inflammatory activities, respectively. Moreover, the spectrum–effect relationship between relative peak area of common peaks and efficacy value was set up by multivariate statistical analysis. Furthermore, 10 batches were selected randomly for validation of those models. The results showed that ethyl acetate and petroleum ether extracts possess excellent antioxidant and anti-inflammatory activities, respectively. Peaks A₆ and A₇ demonstrated the greatest antioxidant activity, while peak A₁₇ showed the strongest anti-inflammatory activity. After a verified experiment, the result was obtained and illustrated that the spectrum–effect relationship which we established could reliably infer antioxidant and anti-inflammatory compounds of the Chinese herbal medicine.     

A review of bioanalytical methods for chronic lymphocytic leukemia drugs and metabolites in biological matrices

Quantitation of drugs used for the treatment of chronic lymphocytic leukemia in various biological matrices during both pre-clinical and clinical developments is very important, often in routine therapeutic drug monitoring. The first developed methods for quantitation were traditionally done on LC in combination with either UV or fluorescence detection. However, the emergence of LC with mass spectrometry in tandem in early 1990s has revolutionized the quantitation as it has provided better sensitivity and selectivity within a shorter run time; therefore it has become the choice of method for the analysis of various drugs. In this article, an overview of various bioanalytical methods (HPLC or LC–MS/MS) for the quantification of drugs for the treatment of chronic lymphocytic leukemia, along with applicability of these methods, is given.     

Study of all stages of the Diels–Alder reaction of cyclopentadiene with 2,3-dicyano-1,4-benzoquinone and monoadducts: Kinetics,thermochemistry, and high pressure effect

The kinetic parameters and enthalpies of the Diels–Alder reactions between cyclopentadiene and 2,3-dicyano-1,4-benzoquinone leading to the formation of two different monoadducts and bisadduct were determined. The stability of adducts is compared. Monoadduct appears to be thermodynamically more stable than the bisadduct. Comparison with the other Diels–Alder reactions studied previously allows us to conclude that the heat effects upon formation of the considered Diels–Alder adducts are the lowest in comparison with all the studied dienophiles.     

An experimental and modeling study of the oxidation of n-heptane,ethylbenzene, and n-butylbenzene in a jet-stirred reactor at pressures up to 10 bar

In the context of better understanding pollutant formation from internal combustion engines, new experimental speciation data were obtained in a high-pressure jet-stirred reactor for the oxidation of three molecules, which are considered in surrogates of diesel fuel, n-heptane, ethylbenzene, and n-butylbenzene. These experiments were performed at pressures up to 10 bar, at temperatures ranging from 500 to 1 100 K, and for a residence time of 2 s. Based on results previously obtained close to the atmospheric pressure for the same molecules, the pressure effect on fuel conversion and product selectivity was discussed. In addition, for the three fuels, the experimental temperature dependence of species mole fractions was compared with simulations using recent literature models with generally a good agreement. For n-heptane, the obtained experimental data, at 10 bar for stoichiometric mixtures, included the temperature dependence of the mole fractions of the reactants and those of 21 products. Interestingly, the formation of species previously identified as C₇ diones was found significantly enhanced at 10 bar compared with lower pressures. The oxidation of ethyl- and n-butylbenzenes was investigated at 10 bar for equivalence ratios of 0.5, 1, and 2. The obtained experimental data included the temperature dependence of the mole fractions of the reactants and those of 13 products for the C₈ fuels and of 19 products for the C₁₀ one. For ethylbenzene under stoichiometric conditions, the pressure dependence (from 1 to 10 bar) of species mole fraction was also recorded and compared with simulations with more deviations obtained than for temperature dependence. For both aromatic reactants, a flow rate analysis was used to discuss the main pressure influence on product selectivities.     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931     

In Situ Metal-Assisted Ligand Modification Induces Mn4 Cluster-to-Cluster Transformation: A Crystallography,Mass Spectrometry,and DFT Study

Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H₄L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H₃L′) was found to be metal-assisted, occurs under solvothermal conditions (H₂O/CH₃OH), and leads to [Mn^II₄(H₃L)₄Cl₂]Cl₂ ⋅ 5 H₂O ⋅ 5 CH₃OH ( Mn₄L₄ ) and [Mn^II₄(H₂L′)₆(μ₃-OH)]Cl ⋅ 4 CH₃OH ⋅ H₂O ( Mn₄L′₆ ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn₄L₄ from the reactants via [MnL] and [Mn₂L₂] below 80 °C, and then disassembly to [MnL] and [MnL₂] followed by ligand modification before reassembly to Mn₄L′₆ via [MnL′], [MnL′₂], and [Mn₂L′₃] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn₄L_xL′_6−x] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during “black-box” reactions.     

Coexistence of Spin–Lattice Relaxation and Phonon-Bottleneck Processes in GdIII–Phthlocyaninato Triple-Decker Complexes under Highly Diluted Conditions

Gd³⁺ complexes have been shown to undergo unusual slow magnetic relaxation processes similar to those of single-molecule magnets (SMMs), even though Gd³⁺ does not exhibit strong magnetic anisotropy. To reveal the origin of the slow magnetic relaxation of Gd³⁺ complexes, we have investigated the magnetic properties and heat capacities of two Gd³⁺-phthalocyaninato triple-decker complexes, one of which has intramolecular Gd³⁺–Gd³⁺ interactions and the other does not. It was found that the Gd³⁺–Gd³⁺ interactions accelerate the magnetic relaxation processes. In addition, magnetically diluted samples, prepared by doping a small amount of the Gd³⁺ complexes into a large amount of diamagnetic Y³⁺ complexes, underwent dual magnetic relaxation processes. A detailed dynamic magnetic analysis revealed that the coexistence of spin–lattice relaxation and phonon-bottleneck processes is the origin of the dual magnetic relaxation processes.     

Solvophobically Driven Complexation of Adamantyl Mannoside with β-Cyclodextrin in Water and Structured Organic Solvents

The effects of solvent and temperature on the complexation of adamantyl mannoside with β-cyclodextrin and 6-O-monotosyl-6-deoxy-β-cyclodextrin were explored experimentally and by means of molecular dynamics simulations. Efficient binding was observed only in hydrogen-bonded solvents, which indicated solvophobically driven complexation. The stability of the inclusion complex was considerably higher in aqueous media. A pronounced temperature dependence of Δ_rH^○ and Δ_rS^○, resulting in perfect enthalpy–entropy compensation, was observed in water. The complexation thermodynamics was in line with classical rationale for the hydrophobic effect at lower temperatures and the nonclassical explanation at higher temperatures. This finding linked cyclodextrin complexation thermodynamics with insights regarding the effect of temperature on the hydration water structure. The complexation enthalpies and entropies were weakly dependent on temperature in organic media. The signs of Δ_rH^○ and Δ_rS^○ were in accordance with the nonclassical hydrophobic (solvophobic) effect. The structures of the optimized product corresponded to those deduced spectroscopically, and the calculated and experimentally obtained values of Δ_rG^○ were in very good agreement. This investigation clearly demonstrated that solvophobically driven formation of cyclodextrin complexes could be anticipated in structured solvents in general. However, unlike in water, adamantane and the host cavity behaved solely as structure breakers in the organic media explored so far.